Pass Your 300-715 Exam Easily With 100% Exam Passing Guarantee [2024]
300-715 Dumps are Available for Instant Access from TestBraindump
NEW QUESTION # 124
Drag the Cisco ISE node types from the left onto the appropriate purposes on the right.
Answer:
Explanation:
NEW QUESTION # 125
What are two differences of TACACS+ compared to RADIUS? (Choose two.)
- A. TACACS+ encrypts the full packet payload, whereas RADIUS only encrypts the password.
- B. TACACS+ supports multiple sessions per user, whereas RADIUS supports one session per user.
- C. TACACS+ uses a connection-oriented transport protocol, whereas RADIUS uses a connectionless transport protocol.
- D. TACACS+ uses a connectionless transport protocol, whereas RADIUS uses a connection-oriented transport protocol.
- E. TACACS+ only encrypts the password, whereas RADIUS encrypts the full packet payload.
Answer: A,C
NEW QUESTION # 126
An administrator is trying to collect metadata information about the traffic going across the network to gam added visibility into the hosts. This Information will be used to create profiling policies for devices us mg Cisco ISE so that network access policies can be used What must be done to accomplish this task?
- A. Configure the RADIUS profiling probe within Cisco ISE
- B. Configure SNMP to be used with the Cisco ISE appliance
- C. Configure NetFlow to be sent to me Cisco ISE appliance.
- D. Configure the DHCP probe within Cisco ISE
Answer: D
NEW QUESTION # 127
What service can be enabled on the Cisco ISE node to identity the types of devices connecting to a network?
- A. central web authentication
- B. profiling
- C. posture
- D. MAB
Answer: B
NEW QUESTION # 128
Which two features are available when the primary admin node is down and the secondary admin node has not been promoted? ()
- A. guest AUP
- B. new AD user 802 1X authentication
- C. hotspot
- D. BYOD
- E. posture
Answer: B,E
NEW QUESTION # 129
What allows an endpoint to obtain a digital certificate from Cisco ISE during a BYOD flow?
- A. My Devices Portal
- B. Application Visibility and Control
- C. Supplicant Provisioning Wizard
- D. Network Access Control
Answer: A
Explanation:
Section: BYOD
NEW QUESTION # 130
What is the deployment mode when two Cisco ISE nodes are configured in an environment?
- A. standard
- B. distributed
- C. active
- D. standalone
Answer: B
NEW QUESTION # 131
A company manager is hosting a conference. Conference participants must connect to an open guest SSID and only use a preassigned code that they enter into the guest portal prior to gaining access to the network. How should the manager configure Cisco ISE to accomplish this goal?
- A. Create entries in the guest identity group for all participants.
- B. Create an access code to be entered in the AUP page.
- C. Create a registration code to be entered on the portal splash page.
- D. Create logins for each participant to give them sponsored access.
Answer: B
NEW QUESTION # 132
A network engineer must enforce access control using special tags, without re-engineering the network design.
Which feature should be configured to achieve this in a scalable manner?
- A. VLAN
- B. SGT
- C. dACL
- D. RBAC
Answer: B
NEW QUESTION # 133
Which advanced option within a WLAN must be enabled to trigger Central Web Authentication for Wireless users on AireOS controller?
- A. override Interface ACL
- B. static IP tunneling
- C. AAA override
- D. DHCP server
Answer: C
Explanation:
Section: Web Auth and Guest Services
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-4/configuration/guides/consolidated/ b_cg74_CONSOLIDATED/b_cg74_CONSOLIDATED_chapter_010110111.html
NEW QUESTION # 134
If a user reports a device lost or stolen, which portal should be used to prevent the device from accessing the network while still providing information about why the device is blocked?
- A. Guest
- B. Client Provisioning
- C. BYOD
- D. Blacklist
Answer: D
Explanation:
Section: BYOD
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/ise/1-3/admin_guide/b_ise_admin_guide_13/ b_ise_admin_guide_sample_chapter_010000.html
NEW QUESTION # 135
An administrator is configuring a Cisco WLC for web authentication Which two client profiling methods are enabled by default if the Apply Cisco ISE Default Settings check box has been selected'? (Choose two.)
- A. HTTP
- B. CDP
- C. LLDP
- D. DHCP
- E. SNMP
Answer: B,C
NEW QUESTION # 136
Refer to the exhibit. An engineer is creating a new TACACS* command set and cannot use any show commands after togging into the device with this command set authorization Which configuration is causing this issue?
- A. The wildcard command listed is in the wrong format
- B. Question marks are not allowed as wildcards for command sets.
- C. The command set is working like an ACL and denying every command.
- D. The command set is allowing all commands that are not in the command list
Answer: B
NEW QUESTION # 137
Which two responses from the RADIUS server to NAS are valid during the authentication process? (Choose two )
- A. access-challenge
- B. access-accept
- C. access-request
- D. access-response
- E. access-reserved
Answer: B,C
NEW QUESTION # 138
Drag and drop the description from the left onto the protocol on the right that is used to carry out system authentication, authentication, and accounting.
Answer:
Explanation:
Explanation
https://www.mbne.net/tech-notes/aaa-tacacs-radius
NEW QUESTION # 139
Drag the steps to configure a Cisco ISE node as a primary administration node from the left into the correct order on the night.
Answer:
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/security/ise/2-4/admin_guide/b_ise_admin_guide_24/b_ise_admin_guide Step 1 Choose Administration > System > Deployment.
The Register button will be disabled initially. To enable this button, you must configure a Primary PAN.
Step 2
Check the check box next to the current node, and click Edit.
Step 3
Click Make Primary to configure your Primary PAN.
Step 4
Enter data on the General Settings tab.
Step 5
Click Save to save the node configuration.
NEW QUESTION # 140
A network administrator is configuring a secondary cisco ISE node from the backup configuration of the primary cisco ISE node to create a high availability pair The Cisco ISE CA certificates and keys must be manually backed up from the primary Cisco ISE and copied into the secondary Cisco ISE Which command most be issued for this to work?
- A. certificate configure Ise
- B. application configure Ise
- C. Import certificate Ise
- D. copy certificate Ise
Answer: B
Explanation:
https://community.cisco.com/t5/network-access-control/ise-certificate-import-export/m-p/3847746
NEW QUESTION # 141
Which two ports do network devices typically use for CoA? (Choose two )
- A. 0
- B. 1
- C. 2
- D. 3
- E. 4
Answer: B,D
Explanation:
Explanation
NEW QUESTION # 142
Which Cisco ISE deployment model provides redundancy by having every node in the deployment configured with the Administration. Policy Service, and Monitoring personas to protect from a complete node failure?
- A. two-node
- B. dispersed
- C. hybrid
- D. distributed
Answer: A
NEW QUESTION # 143
Which term refers to an endpoint agent that tries to join an 802 1X-enabled network?
- A. authenticator
- B. EAP server
- C. client
- D. supplicant
Answer: A
NEW QUESTION # 144
An administrator for a small network is configuring Cisco ISE to provide dynamic network access to users. Management needs Cisco ISE to not automatically trigger a CoA whenever a profile change is detected. Instead, the administrator needs to verify the new profile and manually trigger a CoA.
What must be configuring in the profiler to accomplish this goal?
- A. No CoA
- B. Session Query
- C. Reauth
- D. Port Bounce
Answer: A
Explanation:
https://ciscocustomer.lookbookhq.com/iseguidedjourney/ISE-profiling-policies
NEW QUESTION # 145
What service can be enabled on the Cisco ISE node to identity the types of devices connecting to a network?
- A. central web authentication
- B. profiling
- C. MAB
- D. posture
Answer: D
NEW QUESTION # 146
......
Study resources for the Valid 300-715 Braindumps: https://quiztorrent.testbraindump.com/300-715-exam-prep.html
