Free Sales Ending Soon - Use Real 300-710 PDF Questions [Mar 29, 2022]
Updated Mar-2022 Exam 300-710 Dumps - Pass Your Certification Exam
Who should take the Securing Networks with Cisco Firepower (300-710 SNCF) Exam
People who wish to explore the power of the dynamic culture of the Cisco Learning Network to jump-start their certification and lifelong learning goals should take this exam. Those who want to get useful tools for IT training for all Cisco certifications should also get this certification. People with prior knowledge of Cisco Firepower Threat Defence, including policy configurations, integrations, deployments, management and troubleshooting, are highly recommended to take this exam and get themselves certified from Cisco.
List of target audience for this exam:
- Security administrators
- Network administrators
- Security consultants
- Channel partners and resellers
- System engineers
- Cisco integrators and partners
Introduction to Securing Networks with Cisco Firepower (300-710 SNCF) Exam
The Securing Networks with Cisco Firepower (300-710 SNCF) test is a 90-minute CCNP Security and Cisco Accredited Specialist-Network Security Firepower certification-related exam. This exam evaluates the Cisco Firepower Threat Protection and Firepower knowledge of a applicant, including policy settings, integrations, implementations, management and troubleshooting. These courses, Cisco Firepower Securing Networks, and Cisco Firepower Next-Generation Intrusion Prevention System Securing Network, help candidates prepare for this test.
The primary objective of the exam is to acquire information about the implementation of advanced features of the Next-Generation Firewall (NGFW) and Next-Generation Intrusion Prevention System (NGIPS), including network intelligence, identification of file types, detection of network-based malware, and deep inspection of packets.
This exam tests your knowledge of virtual appliances in the Cisco Firepower Threat Protection and Firepower 7000 and 8000 Series, including:
- Deployments
- Policy configurations
- Integrations
- Management and troubleshooting
NEW QUESTION 106
An engineer is setting up a new Firepower deployment and is looking at the default FMC policies to start the implementation During the initial trial phase, the organization wants to test some common Snort rules while still allowing the majority of network traffic to pass Which default policy should be used?
- A. Balanced Security and Connectivity
- B. Security Over Connectivity
- C. Maximum Detection
- D. Connectivity Over Security
Answer: A
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/security/firepower/623/fdm/fptd-fdm-config-guide-623/fptd-fdm-intrusio
NEW QUESTION 107
An analyst using the security analyst account permissions is trying to view the Correlations Events Widget but is not able to access it. However, other dashboards are accessible. Why is this occurring?
- A. The widget is configured to display only when active events are present.
- B. The security analyst role does not have permission to view this widget.
- C. An API restriction within the Cisco FMC is preventing the widget from displaying.
- D. The widget is not configured within the Cisco FMC.
Answer: D
NEW QUESTION 108
An administrator is attempting to remotely log into a switch in the data centre using SSH and is unable to connect. How does the administrator confirm that traffic is reaching the firewall?
- A. by performing a packet capture on the firewall.
- B. by attempting to access it from a different workstation.
- C. by running Wireshark on the administrator's PC
- D. by running a packet tracer on the firewall.
Answer: D
Explanation:
Reference:
https://www.cisco.com/c/en/us/support/docs/security/firepower-ngfw/212474-working-with-firepower-threat-defense-f.html#anc16
NEW QUESTION 109
An engineer is configuring a Cisco IPS to protect the network and wants to test a policy before deploying it. A copy of each incoming packet needs to be monitored while traffic flow remains constant. Which IPS mode should be implemented to meet these requirements?
- A. passive
- B. routed
- C. Inline tap
- D. transparent
Answer: C
NEW QUESTION 110
Which two routing options are valid with Cisco Firepower Threat Defense? (Choose two.)
- A. ECMP with up to three equal cost paths across multiple interfaces
- B. BGPv6
- C. ECMP with up to three equal cost paths across a single interface
- D. BGPv4 with nonstop forwarding
- E. BGPv4 in transparent firewall mode
Answer: B,C
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/601/configuration/guide/fpmc-config- guide-v601/fpmc-config-guide-v60_chapter_01100011.html#ID-2101-0000000e
NEW QUESTION 111
Within Cisco Firepower Management Center, where does a user add or modify widgets?
- A. context explorer
- B. summary tool
- C. reporting
- D. dashboard
Answer: D
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config-guide-v60/Using_Dashboards.html
NEW QUESTION 112
Which two statements about deleting and re-adding a device to Cisco FMC are true? (Choose two.)
- A. No option to re-apply NAT and VPN policies during registration is available, so users need to re-apply the policies after registration is completed.
- B. The Cisco FMC web interface prompts users to re-apply access control policies.
- C. Before re-adding the device in Cisco FMC, you must add the manager back in the device.
- D. No option to delete and re-add a device is available in the Cisco FMC web interface.
- E. An option to re-apply NAT and VPN policies during registration is available, so users do not need to re- apply the policies after registration is completed.
Answer: A,B
NEW QUESTION 113
An analyst is investigating a potentially compromised endpoint within the network and pulls a host report for the endpoint in question to collect metrics and documentation. What information should be taken from this report for the investigation?
- A. client applications by user, web applications, and user connections
- B. threat detections over time and application protocols transferring malware
- C. number of attacked machines, sources of the attack, and traffic patterns
- D. intrusion events, host connections, and user sessions
Answer: A
NEW QUESTION 114
An engineer has been asked to show application usages automatically on a monthly basis and send the information to management What mechanism should be used to accomplish this task?
- A. context explorer
- B. event viewer
- C. dashboards
- D. reports
Answer: B
NEW QUESTION 115
An organization has a compliancy requirement to protect servers from clients, however, the clients and servers all reside on the same Layer 3 network Without readdressing IP subnets for clients or servers, how is segmentation achieved?
- A. Change the IP addresses of the servers, while remaining on the same subnet
- B. Deploy a firewall in routed mode between the clients and servers
- C. Deploy a firewall in transparent mode between the clients and servers.
- D. Change the IP addresses of the clients, while remaining on the same subnet.
Answer: D
NEW QUESTION 116
IT management is asking the network engineer to provide high-level summary statistics of the Cisco FTD appliance in the network. The business is approaching a peak season so the need to maintain business uptime is high. Which report type should be used to gather this information?
- A. Malware Report
- B. Risk Report
- C. SNMP Report
- D. Standard Report
Answer: B
NEW QUESTION 117
An organization wants to secure traffic from their branch office to the headquarter building using Cisco Firepower devices, They want to ensure that their Cisco Firepower devices are not wasting resources on inspecting the VPN traffic. What must be done to meet these requirements?
- A. Tune the intrusion policies in order to allow the VPN traffic through without inspection
- B. Configure the Cisco Firepower devices to ignore the VPN traffic using prefilter policies
- C. Enable a flexconfig policy to re-classify VPN traffic so that it no longer appears as interesting traffic
- D. Configure the Cisco Firepower devices to bypass the access control policies for VPN traffic.
Answer: D
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/640/fdm/fptd-fdm-config-guide-640/fptd-fdm-ravpn.html
NEW QUESTION 118
Upon detecting a flagrant threat on an endpoint, which two technologies instruct Cisco Identity Services Engine to contain the infected endpoint either manually or automatically? (Choose two.)
- A. Cisco FMC
- B. Cisco Stealthwatch
- C. Cisco ASA 5500 Series
- D. Cisco AMP
- E. Cisco ASR 7200 Series
Answer: B,D
NEW QUESTION 119
Drag and drop the steps to restore an automatic device registration failure on the standby Cisco FMC from the left into the correct order on the right. Not all options are used.
Answer:
Explanation:
NEW QUESTION 120
A network engineer is extending a user segment through an FTD device for traffic inspection without creating another IP subnet How is this accomplished on an FTD device in routed mode?
- A. by using a BVI and create a BVI IP address in the same subnet as the user segment
- B. by leveraging the ARP to direct traffic through the firewall
- C. by bypassing protocol inspection by leveraging pre-filter rules
- D. by assigning an inline set interface
Answer: A
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/security/firepower/640/configuration/guide/fpmc-config-guide-v64/transp
NEW QUESTION 121
Refer to the exhibit. What must be done to fix access to this website while preventing the same communication to all other websites?
- A. Create an access control policy rule to allow port 443 to only 172.1.1.50.
- B. Create an intrusion policy rule to have Snort allow port 80 to only 172.1.1.50.
- C. Create an access control policy rule to allow port 80 to only 172.1.1.50.
- D. Create an intrusion policy rule to have Snort allow port 443 to only 172.1.1.50.
Answer: C
NEW QUESTION 122
What is the disadvantage of setting up a site-to-site VPN in a clustered-units environment?
- A. VPN connections can be re-established only if the failed master unit recovers.
- B. Only established VPN connections are maintained when a new master unit is elected.
- C. VPN connections must be re-established when a new master unit is elected.
- D. Smart License is required to maintain VPN connections simultaneously across all cluster units.
Answer: C
NEW QUESTION 123
A network administrator needs to create a policy on Cisco Firepower to fast-path traffic to avoid Layer 7 inspection. The rate at which traffic is inspected must be optimized. What must be done to achieve this goal?
- A. Configure modular policy framework.
- B. Configure a prefilter policy.
- C. Disable TCP inspection.
- D. Enable lhe FXOS for multi-instance.
Answer: B
NEW QUESTION 124
What is the difference between inline and inline tap on Cisco Firepower?
- A. Inline mode cannot do SSL decryption.
- B. Inline mode can drop malicious traffic.
- C. Inline tap mode does full packet capture.
- D. Inline tap mode can send a copy of the traffic to another device.
Answer: B
NEW QUESTION 125
DRAG DROP
Drag and drop the steps to restore an automatic device registration failure on the standby Cisco FMC from the left into the correct order on the right. Not all options are used.
Select and Place:
Answer:
Explanation:
Section: Management and Troubleshooting
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config- guide-v62/firepower_management_center_high_availability.html#id_32288
NEW QUESTION 126
The event dashboard within the Cisco FMC has been inundated with low priority intrusion drop events, which are overshadowing high priority events. An engineer has been tasked with reviewing the policies and reducing the low priority events. Which action should be configured to accomplish this task?
- A. generate events
- B. drop and generate
- C. drop packet
- D. drop connection
Answer: C
Explanation:
Explanation
Reference"
https://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config-guide-v62/worki
NEW QUESTION 127
Refer to the exhibit.
And engineer is analyzing the Attacks Risk Report and finds that there are over 300 instances of new operating systems being seen on the network How is the Firepower configuration updated to protect these new operating systems?
- A. The administrator requests a Remediation Recommendation Report from Cisco Firepower
- B. Cisco Firepower automatically updates the policies.
- C. Cisco Firepower gives recommendations to update the policies.
- D. The administrator manually updates the policies.
Answer: C
Explanation:
Explanation
Ref:
https://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config-guide-v60/Tailori
NEW QUESTION 128
Which two conditions are necessary for high availability to function between two Cisco FTD devices? (Choose two.)
- A. The units must be different models if they are part of the same series.
- B. The units must be the same version
- C. Both devices can be part of a different group that must be in the same domain when configured within the FMC.
- D. The units must be configured only for firewall routed mode.
- E. The units must be the same model.
Answer: B,E
Explanation:
Reference:
https://www.cisco.com/c/en/us/support/docs/security/firepower-management-center/212699- configure-ftd-high-availability-on-firep.html
NEW QUESTION 129
Which two statements about deleting and re-adding a device to Cisco FMC are true? (Choose two.)
- A. No option to re-apply NAT and VPN policies during registration is available, so users need to re-apply the policies after registration is completed.
- B. The Cisco FMC web interface prompts users to re-apply access control policies.
- C. Before re-adding the device in Cisco FMC, you must add the manager back in the device.
- D. No option to delete and re-add a device is available in the Cisco FMC web interface.
- E. An option to re-apply NAT and VPN policies during registration is available, so users do not need to re- apply the policies after registration is completed.
Answer: A,B
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config-guide-v60/Device_Management_Basics.html
NEW QUESTION 130
Which report template field format is available in Cisco FMC?
- A. box lever chart
- B. bar chart
- C. benchmark chart
- D. arrow chart
Answer: B
Explanation:
Section: Management and Troubleshooting
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config-guide- v60/Working_with_Reports.html
NEW QUESTION 131
......
300-710 Dumps To Pass CCNP Security Exam in One Day: https://quiztorrent.testbraindump.com/300-710-exam-prep.html
