[Jul-2024] 100% Guarantee Download D-NWG-FN-23 Exam Dumps PDF Q&A
Kickstart your Career with Real Updated Questions
EMC D-NWG-FN-23 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
NEW QUESTION # 29
What is the default lease time in hours for an address lease in DHCP?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION # 30
A customer reports they can no longer access their services and a network administrator has been assigned to investigate. A UFD disabled error status appears on all ports. What caused the issue?
- A. Spanning tree Loop-guard was implemented on the uplink-state group.
- B. Both a port channel and its members were assigned to an uplink-state group.
- C. There was no issue; this is normal behavior.
- D. One of the upstream interfaces is an uplink-state group went down.
Answer: A
NEW QUESTION # 31
Refer to the exhibit.
What is the VRRP state of OS10-A after a router with a default VRRP admin priority with VRID100 comes online?
- A. master-state
- B. primary-state
- C. standby-state
- D. backup-state
Answer: A
NEW QUESTION # 32
Which LSA types are used in a single area OSPF topology?
- A. 1, 2 and 5
- B. 4, 5 and 7
- C. 1 and 7
- D. 2, 3 and 5
Answer: A
NEW QUESTION # 33
Refer to the exhibit.
A default route exists on OS10-C that points all internet traffic towards 10.0.13.3 on OS10-B. A network administrator needs to re-route internet traffic only sourced from Host-1 to 10.0.12.2 on OS10-A instead. What feature can the administrator implement to accomplish this goal?
- A. Static Default Routing
- B. Policy-Based Routing
- C. Source-Based Routing
- D. OSPF Cost Manipulation
Answer: B
NEW QUESTION # 34
When creating an alias in OS10 what is the maximum number of variable input parameters that can be defined?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION # 35
What is the valid range of VLAN IDs for Dell EMC Networking OS10 switches?
- A. 0-4095
- B. 0-4092
- C. 1-4093
- D. 1-4096
Answer: C
NEW QUESTION # 36
Which type of protocol is OSPF and what metric does it use to determine best path?
- A. Hybrid protocol that uses hop count as a metric
- B. Link-state protocol that uses a concept of cost as metric
- C. Path vector protocol that uses the Dijkstra algorithm as a metric
- D. Distance Vector protocol that uses bandwidth and delay as metric
Answer: B
NEW QUESTION # 37
Which switch mode is used to manage files and display switch information?
- A. Exec
- B. Configuration
- C. Interface
- D. Network
Answer: A
NEW QUESTION # 38
How does a DHCP Client make a request to a DHCP server following an offer?
- A. Multicast
- B. Unicast
- C. ACK
- D. Broadcast
Answer: B
NEW QUESTION # 39
Refer to the exhibit.
Which configuration will allow S1 to ping S2's Lo0 address?
- A. S1(config-router)# ip route 144.254.32.1 192.168.32.2/32
- B. S1(config)# ip route 192.168.32.2 144.254.32.1/32
- C. S1(config-router)# ip route 192.168.32.2 144.254.32.1/32
- D. S1(config)# ip route 144.254.32.1/32 192.168.32.2
Answer: D
NEW QUESTION # 40
What version of IGMP is required by PIM-SSM receivers?
- A. IGMP 3
- B. IGMP snooping
- C. IGMP 2
- D. IGMP 1
Answer: A
NEW QUESTION # 41
Which LSA type contains information about routes redistributed into OSPF?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION # 42
What is the function of the authentication service?
- A. Validates switch order
- B. Determines which services the user is enabled to access
- C. Determines switch management commands
- D. Validates the user identity
Answer: D
NEW QUESTION # 43
When configuring VRRP in tandem with VLT, what is the default VRRP mode?
- A. active-standby
- B. primary-standby
- C. master-backup
- D. active-active
Answer: C
NEW QUESTION # 44
Two OS10 switches reside within a VLT domain with statically configured primary-priorities. The current primary peer, switch OS10-A, has a priority of 100, while the secondary peer, OS10-B, has a priority of 200.
If OS10-A reboots and comes back online, what roles will the VLT peers be assigned?
- A. OS10-A will be secondary and OS10-B will be master.
- B. OS10-A will be secondary and OS10-B will be primary.
- C. OS10-A will be standby and OS10-B will be primary.
- D. OS10-A will be primary and OS10-B will be secondary.
Answer: B
NEW QUESTION # 45
Which best describes traffic flow in a campus network environment?
- A. South-West
- B. North-East
- C. North-South
- D. East-West
Answer: D
NEW QUESTION # 46
What is the default PIM-SSM IP range?
- A. 224.0.0.0/24
- B. 232.0.0.0/4
- C. 224.0.0.0/4
- D. 232.0.0.0/8
Answer: D
NEW QUESTION # 47
You have been asked to examine a BGP configuration for a co-worker who is having difficulty establishing BGP peering. The address shown is that of the neighbor's Lo0 interface. Given the configuration shown, what would be your recommendation?
S3(config-router-bgp-65042)# neighbor 192.168.32.1
S3(config-router-neighbor)# remote-as 65042
- A. Issue the no shutdown command and verify that the BGP state is ACTIVE
- B. Modify the existing configuration to be:
S3(config-router-bgp-65042)# neighbor 192.168.32.1/24 S3(config-router-neighbor)# peer-as 65042 - C. Add the following to the existing configuration: S3(config-router-neighbor)# update-source loopback 0 S3(config-router-neighbor)# no shutdown
- D. Issue the no shutdown command and verify that the BGP state is ESTABLISHED
Answer: D
NEW QUESTION # 48
What is a valid OS10 iBGP configuration?
- A. S2(config)# router bgp 64507
S2(config-router-bgp-64507)# remote-as 64507
S2(config-router-bgp-64507)# neighbor 192.168.32.1 S2(config-router-neighbor)# update-source loopback 0 S2(config-router-neighbor)# no shutdown - B. S2(config)# router bgp 64507
S2(config-router-bgp-64507)# neighbor 192.168.32.1
S2(config-router-neighbor)# remote-as 64507 S2(config-router-neighbor)# update-source loopback 0 S2(config-router-neighbor)# no shutdown - C. S2(config)# router bgp 64507
S2(config-router-bgp-64507)# peer-as 64507
S2(config-router-bgp-64507)# neighbor 192.168.32.1 S2(config-router-neighbor)# update-source loopback 0 S2(config-router-neighbor)# no shutdown - D. S2(config)# router bgp 64507
S2(config-router-bgp-64507)# neighbor 192.168.32.1
S2(config-router-bgp-64507)# remote-as 64507 S2(config-router-bgp-64507)# update-source loopback 0 S2(config-router-bgp-64507)# no shutdown
Answer: B
NEW QUESTION # 49
......
Earn Quick And Easy Success With D-NWG-FN-23 Dumps: https://quiztorrent.testbraindump.com/D-NWG-FN-23-exam-prep.html
