[Sep 03, 2025] Reliable JN0-452 Exam Tips Test Pdf Exam Material
New 2025 JN0-452 Test Tutorial (Updated 169 Questions)
NEW QUESTION # 22
What is the main advantage of using Wi-Fi 6 (802.11ax) in an IoT deployment with many low- power, low-bandwidth devices?
- A. It has a much longer range than previous standards.
- B. It provides multi-gigabit speeds for each device.
- C. The Target Wake Time (TWT) feature allows devices to sleep for long periods, conserving battery life.
- D. It uses the 6 GHz band, which has less interference.
Answer: C
NEW QUESTION # 23
Which two fields are required when creating a new site? (Choose two.)
- A. RF template
- B. site name
- C. location
- D. time zone
Answer: B,C
NEW QUESTION # 24
You need to create a security policy that blocks IoT devices from accessing the corporate financial servers.
In the Mist UI, what is the first step to creating this rule within a WxLAN policy?
- A. Configure a new RF template for the IoT device location.
- B. Assign labels to the IoT devices and the financial servers.
- C. Create a new WLAN for the IoT devices.
- D. Use the Marvis conversational interface to block the traffic.
Answer: B
NEW QUESTION # 25
A user reports being unable to connect to the corporate WLAN. Marvis Actions identifies the root cause as "Authorization Failure".
What is the most likely reason for this failure?
- A. The client entered the wrong password (PSK).
- B. The DHCP server has no available IP addresses.
- C. The AP is offline.
- D. The RADIUS server is rejecting the user's credentials.
Answer: D
NEW QUESTION # 26
A user successfully connects to a guest WLAN but cannot access any websites. The "DHCP" classifier on the "Successful Connects" SLE is red for this user.
What does this indicate?
- A. The RADIUS server is unreachable.
- B. The user entered the wrong password.
- C. The AP is offline.
- D. The client failed to obtain an IP address from the DHCP server.
Answer: D
NEW QUESTION # 27
Which two Mist Aps would be used for BLE location? (Choose two.)
- A. AP12
- B. AP33
- C. AP32
- D. AP43
Answer: B,D
NEW QUESTION # 28
Which two terms correctly describe transmissions over Wi-Fi? (Choose two.)
- A. half-duplex
- B. point-to-point medium
- C. shared medium
- D. full-duplex
Answer: C,D
NEW QUESTION # 29
Which security standard is mandatory for WPA3, providing stronger protection against offline dictionary attacks compared to WPA2-PSK?
- A. Advanced Encryption Standard (AES)
- B. Simultaneous Authentication of Equals (SAE)
- C. TKIP
- D. CCMP
Answer: B
NEW QUESTION # 30
What is the meaning of a Juniper Mist AP's status LED that is blinking orange three times, pausing, and then repeating the pattern?
- A. The AP is unable to connect to the Mist cloud.
- B. The AP does not have a valid IP address.
- C. The AP is upgrading its firmware.
- D. The AP has insufficient PoE power.
Answer: B
NEW QUESTION # 31
A museum wants to create an interactive experience for visitors. When a visitor with the museum's mobile app approaches a specific exhibit, the app should display additional information about that exhibit.
Which two Mist LBS components must be configured to enable this functionality? (Choose 2.)
- A. A Location Zone drawn around the exhibit on the floorplan.
- B. A Proximity Zone associated with the AP nearest the exhibit.
- C. An Asset Visibility subscription.
- D. A WxLAN policy to allow access to the museum's content server.
- E. A Virtual Beacon placed on the floorplan at the location of the exhibit.
Answer: A,E
NEW QUESTION # 32
You are deploying multiple Mist APs across many sites in your network. You must ensure that you apply consistent WxLAN and WLAN policies across all sites within the same organization.
Which configuration object should be used to accomplish this behavior?
- A. a device profile
- B. an RF template
- C. a config template
- D. site labels
Answer: B
Explanation:
Reference: https://www.juniper.net/documentation/en_US/junos-space-apps/network-director4.0/topics/concept/wireless-rogue-ap.html
NEW QUESTION # 33
Some users cannot connect to the network. You want to identify these users. In Marvis, which query accomplishes this task?
- A. unhappy clients
- B. troubleshoot clients
- C. list clients
- D. troubleshoot access points
Answer: C
Explanation:
Reference: https://www.mist.com/documentation/useful-marvis-queries/
NEW QUESTION # 34
Which Marvis query would an administrator use to identify the wireless clients that have experienced the most connection problems within the last 24 hours?
- A. TROUBLESHOOT clients for last 24 hours
- B. SHOW client health for last 24 hours
- C. RANK clients by event count for last 24 hours
- D. LIST clients for last 24 hours
Answer: C
NEW QUESTION # 35
An administrator has deployed asset tags for tracking equipment, but the location data is unreliable and frequently disappears. The administrator suspects the tags are not configured correctly. Which three settings are recommended by Juniper Mist for BLE beacon tags used for asset visibility? (Choose 3.)
- A. A transmit power of 0 dBm
- B. An advertising interval between 100 ms and 1000 ms
- C. A static MAC Address
- D. An advertising interval of 5000 ms or slower to conserve battery
- E. A dynamic, rotating MAC address for privacy
- F. A transmit power of -20 dBm or lower
Answer: A,B,C
NEW QUESTION # 36
A museum is deploying a user engagement application that provides visitors with information about exhibits as they walk through the galleries. The application uses the Mist Mobile SDK. To trigger content for a specific large exhibit, the administrator needs to define a precise polygonal area on the floorplan. When a user enters this defined area, the SDK should fire an event. Which LBS object should the administrator create on the floorplan to meet this requirement?
- A. A Location Zone
- B. A Wayfinding Path
- C. A Proximity Zone
- D. An Asset Filter
Answer: A
NEW QUESTION # 37
Which two statements correctly describe an extended service set (ESS)? (Choose two.)
- A. Each BSS within the ESS has its own unique BSSID.
- B. The SSID is common across all BSSs within the ESS.
- C. The SSID is unique across all BSSs within the ESS.
- D. Each BSS within the ESS share a common BSSID.
Answer: B,D
NEW QUESTION # 38
You want to identify APs that are not associated with your network. However, the APs broadcast your corporate login page and WLAN name.
What does Mist use to identify APs in this scenario?
- A. a rogue AP
- B. a neighbor AP
- C. an approved AP
- D. a honeypot AP
Answer: A
NEW QUESTION # 39
The "Capacity" SLE is showing a poor health score.
Which of these is a likely cause?
- A. A client is too far away from the AP.
- B. The RADIUS server is slow to respond.
- C. The AP has a faulty cable connection to the switch.
- D. A large number of clients are connected to a single AP, and the RF channel is overutilized.
Answer: D
NEW QUESTION # 40
......
JN0-452 Cert Guide PDF 100% Cover Real Exam Questions: https://quiztorrent.testbraindump.com/JN0-452-exam-prep.html
