100% Free 350-501 Exam Dumps to Pass Exam Easily from TestBraindump [Q132-Q154] | TestBraindump

100% Free 350-501 Exam Dumps to Pass Exam Easily from TestBraindump [Q132-Q154]

Share

100% Free 350-501 Exam Dumps to Pass Exam Easily from TestBraindump

Free 350-501 Exam Questions 350-501 Actual Free Exam Questions


Cisco 350-501 exam is ideal for network engineers who work with service provider technologies, as well as those who wish to specialize in this area. It provides a comprehensive understanding of the core technologies and protocols used in service provider networks and enables network engineers to design, deploy, and troubleshoot these networks effectively.

 

NEW QUESTION # 132
A network engineer must implement SNMPv2 with these parameters
Enable SNMP community string C1sc0 with read-only permissions.
Enable interface index persistence.
Restrict the SNMP community to only the monitoring server with IP address 198.18 19 100/32.
Provide view-only access to ospflfEntry and ospfNbrEntry.
Which configuration must the engineer apply?

  • A. Option C
  • B. Option D
  • C. Option B
  • D. Option A

Answer: D


NEW QUESTION # 133

Refer to the exhibit. A service provider engineer Is configuring the connection between CE1 and CE2. AS
200 of the service provider and AS 100 of enterprise ABC should connect using BGP. The engineer already completed the configuration of VRF RT 100:10 of enterprise ABC. Which configuration must the engineer apply on PE1 to meet the requirement?

  • A. Option D
  • B. Option A
  • C. Option C
  • D. Option B

Answer: C

Explanation:
The correct configuration for PE1 to connect AS 200 of the service provider with AS 100 of enterprise ABC using BGP, considering the VRF RT 100:10 is already configured, would involve setting up BGP with the correct neighbor and route distinguisher settings. Option C is likely the correct choice as it specifies the BGP neighbor to be within the enterprise ABC's AS 100 and includes the address family configuration necessary for VRF-aware BGP sessions. References := The Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR) course materials provide detailed instructions on configuring BGP in a service provider environment, including the use of VRFs and route distinguishers. For more information, please refer to the official Cisco documentation and course materials related to SPCOR1.


NEW QUESTION # 134
Refer to the exhibit.

An engineer is trying to implement BGP configuration on a router Which configuration error prevents the ASBR from establishing a BGP neighborship to a directly connected BGP speaker?

  • A. The VPNv4 address family interferes with the 8GP IPv4 address family negotiations.
  • B. The routing policy is absent for this Cisco IOS XR eBGP instance.
  • C. The TCP session parameters are not specified.
  • D. The IPv4 address family configuration under neighbor configuration-mode must be removed.

Answer: C

Explanation:
https://www.cisco.com/c/en/us/td/docs/routers/xr12000/software/xr12k_r41/routing/configuration/guide/routing_cg41xr12k_chapter1.html


NEW QUESTION # 135
Refer to the exhibit:

Which command is used to complete this configuration for QoS class-based marking?

  • A. PE-A(config-pmap-c)#fair-queue
  • B. PE-A(config-pmap-c)#random-detect
  • C. PE-A(config-pmap-c)#set dscp ef
  • D. PE-A(config -pmap-c)#priority

Answer: C


NEW QUESTION # 136
Refer to the exihibit.

Refer to the exhibit A user is performing QoS marking on internet traffic and sending it with IPv4 and IPv6 headers on the provider edge device PE1. IPv4 traffic is classified with DSCP 4 and IPv6 traffic is classified with DSCP 6. Which action must the engineer take to begin implementing a QoS configuration on PE1 for the IPv6 traffic?

  • A. Create access list IPv6-match and configure match ip dscp 4 and match ip dscp 6 in class maps CM-10 and CM-20.
  • B. Configure match ip dscp 4 in class map CM-10 and match ip dscp 6 in class map CM-20.
  • C. Create access list IPv6-filter and remove DSCP value 4 and 6 in class maps CM-10 and CM-20.
  • D. Create an access list that includes any IPv6 traffic and apply it to CM-20.

Answer: D


NEW QUESTION # 137
Refer to the exhibit:

Which statement about the neighbor statements for 192.168.1.1 is true?

  • A. The router must have TDP configured for the send-label command to operate
  • B. The router sends BGP labels for its prefixes to this peer
  • C. The router sends only a label for the prefix for LoopbackO.
  • D. The neighbor router receives at least four labels from this router

Answer: B

Explanation:
In OSPF, for two routers to establish communication, they must have the same key ID and key value on their interfaces. This ensures secure communication between the OSPF peers. The key ID and value are part of the OSPF authentication mechanism that helps in validating the identity of OSPF peers before exchanging routing information. References: Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR) - Cisco SPCOR Training & Certification


NEW QUESTION # 138
Refer to the exhibit.

An engineer is configuring multitiopology IS-IS for IPv6 on router R1. Which additional configuration must be applied to complete the task?
A)

B)

C)

  • A. Option D
  • B. Option A
  • C. Option C
  • D. Option B

Answer: C


NEW QUESTION # 139
A network engineer is configuring a BGP route policy for the SUBNET prefix set. Matching traffic must be dropped, and other traffic must have its MED value set to 400 and community 4:400 added to the route. Which configuration must an engineer apply?

  • A. Option C
  • B. Option D
  • C. Option B
  • D. Option A

Answer: D


NEW QUESTION # 140
Which statement about the Cisco MPLS TE forwarding adjacency feature is true?

  • A. It enables the headend and tailend routers to establish a bidirectional tunnel
  • B. It enables the MPLS core to use EIGRP as the routing protocol
  • C. It enables the Cisco MPLS TE tunnel to be advertised into the running IGP.
  • D. It enables the tailend router to advertise routes to the headend router over the tunnel

Answer: C

Explanation:
"When the MPLS Traffic Engineering Forwarding Adjacency feature is enabled on a TE tunnel, the link is advertised in the IGP network as a type, length, value (TLV) 22 object without any TE sub-TLV." ...THEN, "You must configure MPLS TE forwarding adjacency tunnels bidirectionally" See section: "Restrictions for MPLS Traffic Engineering Forwarding Adjacency":
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/mp_te_path_setup/configuration/xe-16-6/mp- te-path-setup-xe-16-6-book.pdf


NEW QUESTION # 141
An network engineer is deploying VRF on ASBR router R1. The interface must have connectivity over an MPLS VPN inter-AS Option AB network. Which configuration must the engineer apply on the router to accomplish this task?
A)

B)

C)

D)

  • A. Option C
  • B. Option A
  • C. Option B
  • D. Option D

Answer: D


NEW QUESTION # 142
Refer to the exhibit.

A network engineer must configure an LDP neighborship between two newly installed routers that are located in two different offices. Router 1 is the core router in the network and it has already established OSPF adjacency with router 2. On router 1 and router 2. interface fa0/0 is configured for BFD. Which additional configuration must the engineer apply to the two devices to meet the requirement?

  • A. Router1(config)#int fa0/0 -
    Router1(config-if)#mpls ldp autoconfig
    Router2(config)#router ospf 1 -
    Router2(config-router)#mpls ip
  • B. Router1(config)#int fa0/0 -
    Router1(config-if)#mpls ip -
    Router2(config)#router ospf 1 -
    Router2(config-router)#mpls ldp autoconfig
  • C. Route1(config)#int fa0/0 -
    Router1(config-if)#mpls ldp autoconfig
    Router1(config-if)#mpls ldp discovery interface
    Router2(config)#router ospf 1 -
    Router2(config-router)#mpls ldp autoconfig
    Router2(config-if)#mpls ldp discovery interface
  • D. Router1(config)#int fa0/0 -
    Router1(config-if)#mpls ip -
    Router1(config-if)#mpls ldp discovery transport-address interface
    Router2(config)#int fa0/0 -
    Router2(config-if)#mpls ip -
    Router2(config-if)#mpls ldp discovery transport-address interface

Answer: B


NEW QUESTION # 143
What is a characteristic of the YANG model?

  • A. Spines are used to represent individual attributes of nodes.
  • B. It uses containers to categorize related nodes.
  • C. It is a distributed model of nodes.
  • D. Associate types are optional for each leaf.

Answer: B


NEW QUESTION # 144
Which two actions describe ISP delegation to PCE servers? (Choose two)

  • A. entering the mpls traffic-eng reoptimize command
  • B. adding a new PCE server with lower precedence than the primary PCE
  • C. changing the precedence of any of the PCE servers
  • D. removing TE re-optimization timer timeouts
  • E. adding a new PCE server with higher precedence than the primary PCE

Answer: B,D


NEW QUESTION # 145
Refer to the exhibit:

Based on the show/ command output, which result m true after BGP session is established?

  • A. The IOS XR router does not advertise any routes to the neighbor 192.168.2.2,but it accepts all routes from 192.168.2.2.
  • B. The IOS XR router advertises and accepts all routes to and from eBGP neighbor 192.168.2.2 C. No routes are accepted from the neighbor 192.168.2.2, nor are any routes advertised to it
  • C. The IOS XR router advertises all routes to the neighbor 192.168.2.2, but it does not accept any routes from 192.168.2.2

Answer: B


NEW QUESTION # 146
Refer to the exhibit. The network operations team reported that the access site that is connected to R3 is not connecting to the application server in the data center and that all packets that are sent from the application server to the access site are dropped. The team verified that OSPF and BGP peerings are up in BGP AS 65101 and BGP AS 65201. R4 is expected to receive traffic from the application server route via OSPF. Which action resolves this issue?

  • A. Remove the route-map on R4 when advertising 172.16.20.1 in BGP to R3
  • B. Advertise application server 172.16.20.1 in the OSPF routing table on R6
  • C. Add the next-hop-self command on R6 to enable R3 iBGP peering
  • D. Allow 172.16.20.1 in the BGP advertisement on R3 in the route-map

Answer: D


NEW QUESTION # 147
Refer to the exhibit.

Router 1 and router 2 are running OSPF Area 0. The router logs on both routers show that the LDP link has flapped. Which configuration must the engineer apply to the two routers to implement session protection on the link?

  • A. Option C
  • B. Option A
  • C. Option B
  • D. Option D

Answer: D


NEW QUESTION # 148
Which statement about segment routing prefix segments is true?

  • A. It requires using EIGRP to operate
  • B. It is linked to a prefix SID that is globally unique within segment routing domain
  • C. It is the longest path to a node
  • D. It is linked to an adjacency SID that is globally unique within the router

Answer: B

Explanation:
https://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/segment- routing/configuration/guide/b-seg-routing-cg-asr9k/b-seg-routing-cg-asr9k_chapter_010.pdf


NEW QUESTION # 149
Refer to the exhibit. Which effect of this configuration is true?

  • A. it creates a pseudo wire class named Cisco
  • B. It enables AToM on interface gigabitethemet1/0
  • C. It enables MPLS on the interface
  • D. It enables tagging for VLAN 12 on the interface

Answer: B

Explanation:
https://community.cisco.com/t5/service-providers-documents/configuration-example-atom-any- transport-over-mpls-for-like-to/ta-p/3144810


NEW QUESTION # 150
Refer to the exhibit:

With which router does IOSXRV-1 have LDP session protection capability enabled but session hold up is not active?

  • A. 192.168.0.5
  • B. 192.168.0.3
  • C. 192.168.0.1
  • D. 192.168.0.4

Answer: B


NEW QUESTION # 151
You are configuring MPLS traffic-engineering tunnels in the core. Which two ways exist for the tunnel path across the core? (Choose two.)

  • A. A zero bandwidth tunnel is not a valid option.
  • B. The bandwidth statement creates a "hard" reservation on the link.
  • C. Tunnels can be configured with dynamic path or explicitly defined path.
  • D. Tunnel links inherit IGP metrics by default unless overridden.
  • E. The dynamic path option is supported only with IS-IS.

Answer: C,D

Explanation:
Section: Architecture


NEW QUESTION # 152
Drag and drop the NAT64 descriptions from the left onto the correct NAT64 types on the right.

Answer:

Explanation:


NEW QUESTION # 153
Drag and drop the BGP Best Path Algorithm rules from the left into the corresponding order of importance on the right.

Answer:

Explanation:


NEW QUESTION # 154
......

Latest 100% Passing Guarantee - Brilliant 350-501 Exam Questions PDF: https://quiztorrent.testbraindump.com/350-501-exam-prep.html